Thread locking sealant utilizes the inhibitory effect of oxygen in the air to keep the adhesive liquid in a liquid state. During the construction process, apply the adhesive solution to the surface of the thread. Before tightening the thread, the oxygen in the air prevents the adhesive solution from solidifying; When the thread is tightened and isolated from air for solidification, the liquid crosslinks into a high-performance thermosetting solid, filling the entire thread gap to prevent loosening and leakage caused by vibration and impact.
& nbsp; & nbsp; Thread locking sealant utilizes the inhibitory effect of oxygen in the air to keep the adhesive liquid in a liquid state. During the construction process, apply the adhesive solution to the surface of the thread. Before tightening the thread, the oxygen in the air prevents the adhesive solution from solidifying; When the thread is tightened and isolated from air for solidification, the liquid crosslinks into a high-performance thermosetting solid, filling the entire thread gap to prevent loosening and leakage caused by vibration and impact.
nine hundred
& nbsp; & nbsp; Metal pipes are a type of pipeline commonly used for water or gas supply. Generally, these pipes are buried underground or on walls and require good sealing. If the sealing is poor, it can be difficult to repair leaks. Therefore, thread locking sealant is used to seal the pipes and nuts on the pipes.
.png "螺紋鎖固密封膠")
& nbsp; & nbsp;
& nbsp; & nbsp; Characteristics of thread locking sealant
& nbsp; & nbsp; 1. Single component, no need for proportioning glue, thixotropic viscosity, not easy to flow, easy to operate< br />
& nbsp; & nbsp; 2. The adhesive solution outside the joint does not solidify and will not block the adhesive system, making it easy to clean< br />
& nbsp; & nbsp; 3. The thread gap is filled with colloid to prevent corrosion of the thread< br />
& nbsp; & nbsp; 4. After gluing, the pipeline does not require special equipment assembly. It can be tightened with a wrench and disassembled with pliers;
nine hundred and two
& nbsp; & nbsp; Usage of thread locking sealant
& nbsp; & nbsp; 1. Clean the oil stains on the surface of the glue application area before applying glue. Dust, rust, etc., dry surface< br />
& nbsp; & nbsp; 2. Apply glue to the external thread engagement part and tighten the pipe thread at once. If the gap between the threads is large, increase the amount of glue applied and also apply glue to the internal thread at the same time< br />
& nbsp; & nbsp; Ruilangda adhesive focuses on solving various bonding problems, with dedicated personnel providing technical support, sample testing, and customized according to demand.
