& nbsp; & nbsp; The frame components used in PV products produced by solar photovoltaic panels are made of aluminum alloy material. When put into use, it is required that the sealant provided by our company has the following excellent properties to ensure the stability of the product:< br />


  & nbsp; & nbsp; Adhesive environment

  & nbsp; & nbsp; The bonding and sealing of aluminum alloy frame with tempered glass on the front surface and thin film on the back surface.
nine hundred
  & nbsp; & nbsp; Adhesive requirements

  & nbsp; & nbsp; 1. Excellent sealing performance, preventing water/steam from entering and corroding internal components, as well as preventing dust from entering and accumulating, which affects the efficiency of component operation< br />
  & nbsp; & nbsp; 2. Excellent aging resistance and weather resistance, PV products are exposed to air for a long time and suffer from natural weather conditions; Take care of”, Southern Sunshine has a lifespan requirement of 20 to 30 years for PV products, which also places higher demands on the performance of our sealant< br />
  & nbsp; & nbsp; 3. Excellent UV resistance, as a PV product; Protective Umbrella; The frame components are exposed to sunlight for a long time, and strict requirements are placed on the UV resistance of the sealant< br />
  & nbsp; & nbsp; 4. Excellent fixation, as the frame components are exposed to the outside world and easily affected by external factors such as hail in natural weather, there are also high requirements for the fixation of the sealant.
 
  & nbsp; & nbsp; Recommended adhesive

  & nbsp; & nbsp; Jiagu Solar Photovoltaic Special Adhesive HY595 is a single component silicone sealant used for connecting and sealing battery module frames and laminates.
nine hundred and one
  & nbsp; & nbsp; Product Features

  & nbsp; & nbsp; 1. Easy to operate, both manual and mechanical gluing are available, providing you with excellent operational convenience< br />
  & nbsp; & nbsp; 2. It has excellent sealing performance and can effectively prevent moisture and dust< br />
  & nbsp; & nbsp; 3. Good adhesion to aluminum, glass, backboards, etc< br />
  & nbsp; & nbsp; 4. Resistant to yellowing, tested for 85 ℃ and RH 85% aging resistance, with long-term reliable weather resistance and aging resistance performance< br />
  & nbsp; & nbsp; 5. It has excellent resistance to ultraviolet radiation and can withstand long-term exposure to ultraviolet radiation< br />
  & nbsp; & nbsp; 6. After curing, it has elasticity, providing good quality assurance for the product during use and transportation< br />
  & nbsp; & nbsp; 7. Excellent flame retardancy, certified as UL94V-0 flame retardant< br />
  & nbsp; & nbsp; 8. Safe and environmentally friendly, providing product safety and assurance through the EU ROHS standard;
nine hundred and two
  & nbsp; & nbsp; Usage

  & nbsp; & nbsp; 1. Clean the surface: Clean the surface of the adhered or coated material and remove rust, dust, oil stains, etc< br />
  & nbsp; & nbsp; 2. Shi & nbsp; Glue: Unscrew (or peel off) the cap of the rubber hose, squeeze the glue onto the cleaned surface to distribute it evenly, and then close and fix the adhered surface< br />
  & nbsp; & nbsp; 3. Solid & nbsp; Transformation: Place the glued or sealed components in the air and let them naturally solidify. The curing process is a curing process from the surface to the interior. Within 24 hours (at room temperature and 55% relative humidity), the adhesive will cure to a depth of 2-4mm. If the application position is deep, especially in areas that are not easily exposed to air, the complete curing time will be extended. If the temperature is low, the curing time will also be extended. It takes more than 7 days for the 6mm thick sealant to fully cure.