Product Description:
  & nbsp; & nbsp; Huayu (Ruilangda) rubber adhesive is a type of two-component, room temperature fast curing, modified chloroprene rubber material. It has aging resistance, high bonding strength, good toughness, and can be operated under load after bonding.
Product features:
Modified chloroprene rubber, medium viscosity, high strength.
Main purpose:
Used for on-site gluing of belt conveyor drum surfaces, as well as room temperature bonding between rubber and metal, canvas and metal.
Adhesive process:
1. According to A: B=10: Mix thoroughly and evenly in a 1:1 ratio, and use up within 2 hours.
2. Use a short and hard brush to evenly apply the mixed adhesive solution twice on the joint surface. Three layers of adhesive must be applied on the coarse mesh woven fabric. After applying the glue, the glue should be dry to the surface and not stick to the back of the fingers anymore.
3. After the layer table dries, align the two joints and bond them together. Roll the joint with a pressure roller to ensure compaction.
4. After bonding, the tape should be left to rest for 30 minutes before being tensioned.
5. It is better to seal the two interface seams with HY988 rubber repair agent.
Attention:
Avoid at 15 ° C; Construction shall be carried out in low temperature and humid environments below C and with humidity greater than 90%.
Packaging specification: 1000g/set

Storage:
In a low-temperature dry place, the shelf life is 18 months.